Prism Piercing/Earrings

For individuals with metal allergies:

We offer complimentary replacement of earring fittings with metal allergy-friendly options for the following products:

1. Stainless steel screw-back earrings

2. Resin clip-on earrings

Please indicate your preference by specifying "Stainless Steel Fittings" or "Resin Earrings" in the comments section when placing your order.

How to care for your jewelry

K18 and all other accessories

After use, we recommend that you wipe off any dirt and dust with a soft dry cloth and store the jewelry in an OPP bag or case.

We recommend the following care depending on the material indicated on the mount.

For plated and coated materials such as 18KGP R.H.P., and for all earrings and pierced earrings

All earrings and earring hardware

Do not use abrasive polishing cloths, etc., as they will remove the coating. To remove stains, wash gently with a cloth dampened with lukewarm water and neutral detergent (e.g., kitchen detergent). Brushes such as toothbrushes are strictly prohibited as they may cause the plating to peel off. Afterwards, gently dry the item with a dry cloth without leaving it wet.

Solid brass products

Since there is no surface treatment, the color of solid brass products will react with substances in the air over time, resulting in a deep antique-like color. If you are concerned about this, please use a commercially available metal polisher or sandpaper to clean the product. If you soak only the metal part in vinegar, it will return to a brighter color.

About repair

In case of initial defects, we will replace the product after confirming the defects with the attached photos in the e-mail sent within 7 days after the product arrives.

For discoloration, damage, etc., caused by long-term use, we will repair as much as possible, such as re-polishing, re-coating, etc. ( at an additional cost), so please consult us once.